Huni Badger - How to clean your HuniTips

Items Needed:

Small Metal Tool or Paperclip
Fully Charged Battery
91% Isopropyl Alcohol
Cotton Swabs
Paper Towels

Step 1: Unscrew the HuniTip from the Huni Badger. Excess residue can make the HuniTip difficult to remove.

Step 2: Lightly coat paper towel with isopropyl alcohol to wipe the outer wall and threads clean.

Step 3: Screw the HuniTip back in.

Step 4: Turn the Huni Badger on with 5 clicks & let it run for a full cycle (60 seconds). Allow enough time for the HuniTip to cool down.

Step 5: Carefully scrape the inside of the HuniTip to loosen and remove the carbon buildup. Be careful not too far as this could damage the internal connecting points.

Step 6: Soak a cotton swab in isopropyl alcohol and wipe off excess. Insert the cotton swab into the HuniTip and slowly twist to clean the walls. Repeat as needed until HuniTip is clean.

Step 7: Turn the Huni Badger on with 5 clicks again and burn-off the residual isopropyl alcohol. While the Huni Badger HuniTip heats up, you may be able to see the carbon burning off of the ceramic. Keeping your HuniTips maintained will keep your Huni Badger working effectively!

Comments: 13

Peter Bell 2020-01-13 19:48

I'm not easily impressed...quite the opposite.... But I am completely happy with my huni badger....incredible work!

Richard Rodriguez 2020-01-21 14:59

Does the actual box of the hunibadger need to be cleaned? Does it get clogged internally(the box mod I guess)

Reply by Huni Badger;

Yes, you should fully clean the Huni Badger to keep it in the best working condition. We have lots of videos on YouTube if you search under "Huni Badger cleaning". Here is a basic cleaning video to help get you started. https://youtu.be/ndSQKkrOq7o

kevan chandler 2020-08-18 07:34

my unit constantly smokes, have cleaned it and it still smokes?

Reply by Huni Badger:

That may be reclaim in your HuniTips. Here is an advance HuniTip video that should help. https://youtu.be/xrHxuLE6Ulw

Tom 2020-10-01 15:35

Hey there, 1st I love your product. I use it all the time to take my medicine. I am having an issue with your hi temp tips. Everytime I clean them using the alcohol , it seems that it weakens them and they break within a few days. I was buying them from Keepin it Glassy in pittsburgh pa. I asked the owner (who uses and has one) and he told me to reach out to you guys! I just ordered 2 tips from your web site to see if there is a difference. Please let me know if you have any suggestions!! I'm going thru a tip about every 6 to 8 weeks. Please let me know Tom

Please email us at admin@hunibadger.com and our customer service rep can help you sort it out.

Rick Heath 2021-07-12 00:37

I live mine thanks.

Todd 2022-03-12 11:11

how do we clean the carbon buildup

Heather 2022-03-30 11:25

I was curious if you know what size screws are used for this side of the Huni badger? We managed to get one of our pieces wedged right there and need to take that front plate off.

Happy 2022-05-25 03:22

Hello, I think i suck too hard on the huni badger and the clog is in the main body. I took apart the ceramic piece and everything is pretty clean already. Should i be able to see through daylight through the whole thing? If i need to clean the actual video you don't show how to clean the inside body.

Hi Happy, if you search "Huni Badger cleaning" on YouTube we have lots of videos showing how to refresh your Huni Badger.

Here's a basic cleaning video to get you started https://youtu.be/ndSQKkrOq7o

Justin Moldan 2022-05-25 05:03

So I broke the low temp tip cleaning it. it just came apart. I was very disappointed and started using the high temp tip. Now a few days later my device is not heating up at all after I just tried to clean the high Temp tip. Please help

Gary 2022-05-31 08:32

That doesn't show how to clean the tube inside that gets caked up idk y they charged so much for the something don't cost but 20 to 50 bucks to make an the tube hole should be alot bigger for sure need to upgrade with a bigger tube

The gunk in the ceramic tip can be heated up to carbonize, then scrapped off with the included dab tool. The stainless steel airway can be cleaned with the included pipe cleaner and ethanol or isopropyl alcohol.

Casey 2022-09-08 12:03

How's far is to far?

The two points where the wires connect to the ceramic tube of the HuniTIp inside the airway would be too far.

Justin Stewart 2022-10-01 10:52

My high temp tip broke off inside my huni badger if I unscre the end with the 4 screws at I able to grab the tip and unthread it to replace it?

Rick Hemmert 2022-10-08 20:22

What is your blaze tip do differently than the high or low temp tips? Why can’t the tips be soaked in alcohol?

My account

Quick Links

Newsletter

Cleaning Your HuniTip

Prepare to Elevate Your Dabbing Experience with the Huni Badger Pro!

Essentials: Water Filtration Attachments

Cleaning Your HuniTip

My account

Quick Links

Newsletter